Digital Equipment Digital AlphaStation 400 Series, Информация пользователя

Страница: 80 / 121

Console Commands
Deposit Command
The deposit command writes data to an address that you specify. The address can be a
memory location, register, device, or file.
The syntax of the deposit command is shown below:
deposit [-{b,w,l,q,o,h}] [-{physical,virtual,gpr,fpr,ipr}] [-n
<count>] [-s <step>] [<device>:]<address> <data>
The deposit command options are described in Table A-11.
Table A-11. SRM Deposit Command Options
Command Option Description
-b Byte of data.
-w Word of data.
-l Longword of data.
-q Quadword of data.
-o Octaword of data.
-h Hexaword of data.
-physical References physical address space.
-virtual References virtual address space.
-gpr References general purpose register address space.
-fpr References floating point register (FPR) address space.
-ipr References internal processor register (IPR) address space.
-n <count> Specifies the number of consecutive locations to examine.
-s <step> Specifies the address increment as a hexadecimal value. This
option allows you to override the increment that is normally
derived from the data size.
[<device>:] Selects the device to access. The following devices are
supported:
•
pmem: physical memory.
•
vmem: virtual memory. All access and protection checking
occurs.
A-14