Digital Equipment AlphaServer 1200, Руководство по обслуживанию

Страница: 277 / 278

Index 5
typical dialout command, C-17
RCM commands
?, C-11
alert_clr, C-8
alert_dis, C-8
alert_ena, C-8
disable, C-9
enable, C-9
halt, C-10
haltin, C-11
haltout, C-11
hangup, C-10
help, C-11
poweroff, C-11
poweron, C-12
quit, C-12
reset, C-12
setesc, C-13
setpass, C-13
status, C-14
readme command (LFU), A-21, A-23
Registers, 5-1
Remote console manager. See RCM
Remote Console Manager. See RCM
Remote control switch, 1-25
Remote dial-in, RCM, C-5
reset command, RCM, C-12
S
Safety guidelines, 6-1
SCSI cables, 6-4
SCSI Disk removal and replacement, 6-34
SCSI Repeater removal and replacement,
6-38
Secure mode
releasing, 3-7
Serial ports, 1-23
Serial terminal, 2-19
setesc command, RCM, C-13
setpass command, RCM, C-13
Soft errors, categories of, 4-4
SRM console, 1-7, 2-23
SROM, 2-21
defined, 2-4
errors, 2-11
power-up test flow, 2-8
tests, 2-10
status command, RCM, C-14
StorageWorks, 1-36
backplane removal and replacement, 6-
36
disk removal and replacement (, 6-34
repeater removal and replacement, 6-38
System
architecture, 1-8
fully configured, 1-9
System bus, 1-9
System bus address parity error, 4-50
System bus block diagram, 1-18
System bus ECC error, 4-48
System bus nonexistent address error, 4-
49
System bus to PCI bus bridge, 1-20
System bus to PCI bus bridge module, 1-9
System bus to PCI/EISA bus bridge
module, 1-9
System cables, 6-5
System Cables and jumpers, 6-5
System components, 1-3
System consoles, 1-6
System correctable errors, 4-5
System drawer
remote operation, C-2
System exposure, 6-6
System FRU locations, 6-2
System machine checks, 4-5
System motherboard, 1-16
PCI I/O subsystem section, 1-22
power control logic section, 1-26
remote control logic section, 1-24
removal and replacement, 6-16
System bus section, 1-18
system bus to PCI bus bridge section,
1-20
System motherboard LEDs, 3-2