Digital Equipment AlphaServer 1200, Руководство по обслуживанию

Страница: 260 / 278

C-16 Service Manual PRELIMINARY
C.4 Dial-Out Alerts
When you are not monitoring the system remotely, you can use the RCM dial-
out feature to notify you of a power failure within the system.
When a dial-out alert is triggered, the RCM initializes the modem for dial-out, sends
the dial-out string, hangs up the modem, and reconfigures the modem for dial-in.
The modem must continue to be powered, and the phone line must remain active, for
the dial-out alert feature to work. Also, if you are connected to the system remotely,
the dial-out feature does not work.
Enabling Dial-Out Alerts
1. Enter the set rcm_dialout command, followed by a dial-out alert string, from
the SRM console (see
²
in Example 6–1). See the next topic for details on
composing the modem dial-out string.
2. Invoke the RCM and enter the enable command to enable remote access dial-in.
The RCM status command should display “Remote Access: Enable.” See
³
.
3. Enter the alert_ena command to enable outgoing alerts. See
´
.
Example 6–1 Configuring the Modem for Dial-Out Alerts
P00>>> set rcm_dialout “ATDT string#;”
²
RCM>enable
RCM>status
.
.
Remote Access: Enable
³
.
RCM>alert_ena
´