Digital Electronics GP-2401 Series, Руководство пользователя

Страница: 96 / 139

6-27
Chapter 6 - Initializing the GP
GP-2401/2501/2601 Series User Manual
PLC PRIORITY
According to how the GP is used, select either Operation priority (OPE.) or
Display priority (DISPLAY).
Display
Setup the GP to this option when using the GP mainly as a monitor screen. The
GP will command a higher display speed as a result; however, the response time
for the touch panel's operations will slow.
Operation
Set up the GP to this option when using the GP mainly as a monitor screen. The
touch panel’s numeric value input or switch function response speed will become
higher as a result.
When “OPE” is selected, the response time for the touch panel’s operation is
quicker than the response time when the “DISPLAY.” is selected, however, the
display refresh cycle time will slow.
• In a standard network setup, use the same settings for all connected
GP's.
• To increase the display speed, be sure the addresses used are con-
secutive addresses. When bit addresses are used, use addresses
that are consecutive to word units.
The Customize function modifies the n:1 (multi-link) connection's communication
method to make it more efficient. To perform GP<-->PLC communication effi-
ciently, the user should first determine whether they wish to have Operation or
Display priority set for the GP. Based on this, the communication response speed
can be upgraded. (However, this also depends on the complexity of the screen
information displayed.)
6.5.3 CUSTOMIZE SETUP (n:1)