Digital Electronics GP-2401 Series, Руководство пользователя

Страница: 74 / 139

6-5
Chapter 6 - Initializing the GP
GP-2401/2501/2601 Series User Manual
When these five items, "Current Screen Number", "Error Status", "Clock Data
(Current)", "Change Screen Number", and "Display ON/Off", have been selected,
word addresses are assigned to each item, in order, as shown here.
In the screen above, the device address used for [SET UP OPERATION
SURROUNDINGS]’s “SYSTEM AREA START DEV / START ADR” is “+0”.
Thus, in the example shown above, when the “SYSTEM AREA START DEV /
START ADR” is “D00200”, and the [CHANGE SCREEN NO.] has been desig-
nated, the address is shown as “+6” and you will need to then enter “D00206”
(i.e.“D00200” + 6) to use this address.
For details about setting “SYSTEM AREA START DEV / START ADR”, refer to
6.5.1 SET UP OPERATION SURROUNDINGS(1:1/n:1)