manualshive.com logo in svg

Digital Electronics GP-2401 Series, Руководство пользователя

Поделиться
Скачать
Digital Electronics GP-2401 Series Скачать руководство пользователя страница 111

7-8

Chapter 7 - RUN Mode and Errors

GP-2401/2501/2601 Series User Manual

The following items are problems that may occur while using this unit.

(A)  No Display

The screen will not display even when the unit is powered On.  Also, during RUN
mode, the screen disappears.

(B)  No GP/HOST Communication

The GP unit cannot extract data from the host.  An error message may appear on
the screen as a result.

  

7.4 Error Messages

(C)  Touch Panel Does Not Respond

The touch panel does not react when pressed, or the reaction time is very slow.

(D)  Buzzer Sounds when GP power is turned ON

The GP's buzzer will sound intermittently after power is first turned ON.

(E) Clock Settings Cannot be Entered

Even after clock settings are entered, the GP unit's clock settings remain eg.) 00/01/01.

(F) OFFLINE displays During RUN Mode 

The GP goes to the OFFLINE mode unexpectedly while operating, or the GP
automatically goes to the OFFLINE mode when the power is turned ON.

For these first five problems, see the troubleshooting tables on the following
pages.

For the last problem (F), a SYSTEM ERROR may have developed while display-
ing the OFFLINE mode screen.

  

 7.5 Error Message Details

Be sure that no object has touched the screen accidentally if the GP goes to the
OFFLINE mode without displaying an error message when the power turned ON.
If any object may have possibly touched the top left corner of the screen within 10
seconds after the power turned ON, that may cause the GP to go OFFLINE.

This section describes how to find and resolve problems that may occur on the GP.
If there is a problem with the PLC, please refer to the corresponding PLC manual.

7.3

Troubleshooting

7.3.1 Possible Types of Trouble

Содержание GP-2401 Series












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды