manualshive.com logo in svg

Digital Electronics GP-2401 Series, Руководство пользователя

Поделиться
Скачать
Digital Electronics GP-2401 Series Скачать руководство пользователя страница 53

Chapter 3 - Installation and Wiring

3-12

GP-2401/2501/2601 Series User Manual

4) Confirm that the CF Card Access

LED turns ON.

2) Insert the CF Card in the CF Card

Slot, until the ejector button is pushed
forward.

3) Close the cover. (As shown.)

 Removing the CF Card

Simply reverse the steps shown in the previous “Inserting CF Card” explanation. Prior
to removing the CF Card, confirm that the CF Card Access LED is turned OFF.

 Inserting the CF Card

Use the following steps to insert the CF Card in the GP.

(The illustrations below show the procedures for the GP-2501/2601 Series models.
However, these procedures are also the same for the GP-2401 Series.)

1) Slide the CF Card Cover in the direction

shown here, then upwards to open the
cover.

The GP cannot access the
CF Card if the CF Card
cover is already opened. If
h o w e v e r,   t h e   C F   C a r d
Cover is opened while the
GP is accessing the CF
Card, access will not be
interrupted.

Содержание GP-2401 Series












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды