manualshive.com logo in svg

Digital Electronics GP-2401 Series, Руководство пользователя

Поделиться
Скачать
Digital Electronics GP-2401 Series Скачать руководство пользователя страница 133

Chapter 8 - Maintenance

GP-2401/2501/2601 Series User Manual

8-4

8.3

Replacing the Backlight

When the unit’s backlight burns out, the unit’s status LED will turn orange. If the
OFFLINE menu’s “USE TOUCHPANEL AFTER BACKLIGHT BURNS OUT”
feature is set to “NO”, the GP’s touch panel will be disabled. 

*1

   

6.4.3 SET UP TOUCH PANEL

GP2000 Series units use a CFL, long-life type backlight. The actual life of the
backlight however, will vary depending on the GP’s operating conditions, and
replacement may be required. A GP2000 Series backlight has a life of 50,000
hours (approx. 5.7 years, at 25

o

C and 24 hour operation), when the backlight is lit

continuously (time required for brightness to fall to half its normal level.)

*1

 If “NO” has been selected for the OFFLINE menu’s “FORCE RESET” feature, Touch-

Panel operation is disabled

 

6.4.3 SET UP TOUCH PANEL

WARNINGS

• To prevent an electric shock, be sure the GP’s power cord

is unplugged from the power outlet prior to replacing the
backlight.

• When the power has just been turned OFF, the unit and

backlight are still very hot. Be sure to use gloves to pre-
vent burns.

• The backlight is very fragile. Do not touch the glass tube

directly or try to remove its power cord. If the glass tube
breaks you may be injured.

Содержание GP-2401 Series












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды