Digital Electronics GP-2401 Series, Руководство пользователя

Страница: 62 / 139

5-1
GP-2401/2501/2601 Series User Manual
OFFLINE Mode provides access to the Initialize, Self-Diagnosis, and other features
built into the GP. Before you can use any of these features, however, you will need to
change the GP to OFFLINE mode.
OFFLINE mode is unavailable in a completely new GP until the neces-
sary GP system data has been transferred from your PC’s screen editor
software. To do this, be sure the GP's power cord is plugged in and when
you transfer screen data from your PC to the GP, your GP’s system data
will be automatically sent.
To INITIALIZE your GP or perform SELF-DIAGNOSIS, you must first switch the
GP to OFFLINE mode. There are two ways to enter OFFLINE mode. First, is
immediately after plugging in the GP's power cord, and second, by using the Forced
Reset feature.
Touch the upper left-hand corner of the GP screen within 10 seconds of plugging
in the GP's power cord and the GP will change to OFFLINE mode.
5.1.1 After Plugging in the Power Cord
For information about transferring data to the GP, refer to Chapter 4-
Transfer, or the GP-PRO/PBIII for Windows Operation Manual (included in the screen
creation software)
5.1 Entering OFFLINE Mode
Chapter
5 OFFLINE Mode
1. Entering OFFLINE Mode
2. OFFLINE Mode Main Menu
3. INITIALIZATION
4. SELF-DIAGNOSIS