manualshive.com logo in svg

Digital Electronics GP-2401 Series, Руководство пользователя

Поделиться
Скачать
Digital Electronics GP-2401 Series Скачать руководство пользователя страница 64

5-3

Chapter 5 - OFFLINE Mode

GP-2401/2501/2601 Series User Manual

Select the desired menu item by touching the corresponding screen item bar.

Each Main Menu item is used as follows.

INITIALIZE

The setup items contained in this menu are used to control the GP unit.

SCREEN DATA TRANSFER

Select to transfer screen data to and from the screen editing software.

SELF-DIAGNOSIS

Checks to see if there are any problems with the GP System or Interface (I/F).

RUN

Starts GP operation.

For more information about INITIALIZE, refer to 

Chapter 6.

For more information about TRANSFER SCREEN DATA, refer to 

Chapter 4 

or

 GP-

PRO/PBIII for Windows Operation Manual 

(included with the screen creation software)

For more information about SELF-DIAGNOSIS and RUN, refer to 

Chapter 7

.

5.2

OFFLINE Mode Main Menu

Each menu item shown below has different settings that must be set to match the
corresponding PLC in order for the GP to communicate properly.
Entering OFFLINE mode calls up the following screen.

Содержание GP-2401 Series












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды