Digital Aquatics ReefKeeper Lite, Руководство пользователя

Страница: 22 / 30

38
ReefKeeper Lite User Guide
Programming
The next prompt will be for “Timer”.
6
Press the [Up] or [Down] buttons to select the timer that will determine the on state of
the Advanced Light and press [Enter] to confi rm.
The next prompt will be for “In Standby” with the options of On/Off /Ignore.
This sets the state of the output when you enter Standby mode on the head unit.
7 Press the [Up] or [Down] buttons to make your selection and press [Enter] to confi rm.
The next prompt is for setting the default state for the output. If the programmed module
can no longer communicate with the head unit, the module will set the output to the state
chosen in the default setting. For example, if a heater is plugged into channel 1 on a PC4
and it can no longer communicate with the head unit, the default state will take aff ect.
8 Press the [Up] or [Down] buttons to choose between the “On” and “Off ” options.
The screen will change and show “Save”.
9 Press the [Enter] button to save.
You can go back from a save by pressing [Back] when save is fl ashing.
Switch
The Switch function takes up to two switch inputs and can be used to control an Auto Top Off
(ATO) system or water change system. It allows you to trigger a timer with one switch and use a
second switch as a safety cut off .
To set up the Switch function
1 From a Module’s Port Menu, select “Function” and press [Enter] .
2 Press the [Up] or [Down] buttons to scroll to “Switch” and press [Enter] .
The fi rst prompt will display “On Device” with “None” fl ashing.
3 Press the [Up] or [Down] buttons to select the probe or device that will trigger the
switch function and press [Enter] to confi rm.
The next prompt will be for “On When” and is referring to the state of the switch.
ReefKeeper Lite User Guide
39
Programming
4
Press the [Up] or [Down] buttons to select between the two options “Open” or
“Closed” and press [Enter] to confi rm.
The next prompt will be for “Timer” with 00 fl ashing
5
Press the [Up] or [Down] buttons to select the timer that will be activated and press
[Enter] to confi rm.
The next prompt will be for “Off Device”. While any device can be picked you should use a
switch input for the function to operate correctly.
6
Press the [Up] or [Down] buttons to select the probe or device that will terminate the
switch function and press [Enter] to confi rm.
The next prompt will be for “Standby Mode”. This is the state that the output will take dur-
ing standby regardless of the state of the function
7
Press the [Up] or [Down] buttons to select between the options, “On”, “Off ” or “Ignore”
and press [Enter] to confi rm.
The next prompt is for setting the default state for the output. If the programmed module
can no longer communicate with the head unit, the module will set the output to the state
chosen in the default setting. For example, if a heater is plugged into channel 1 on a PC4
and it can no longer communicate with the head unit, the default state will take aff ect.
8 Press the [Up] or [Down] buttons to choose between the “On” and “Off ” options.
The screen will change and show “Save”.
9 Press the [Enter] button to save.
You can go back from a save by pressing [Back] when save is fl ashing.