User’s Manual
DHT 300 SERIES
NTSC Version
3. POP1 BUTTON (DHT309)
POP1 divides the screen into 8 screens. To exit POP1 mode, press the other button.
4. POP2 BUTTON (DHT309)
POP2 divides the screen into 9 screens. To exit POP2 mode, press the other button.
5. SEQ BUTTON
Used to sequence between all camera locations in full screen in sequential order with the
screen automatically switching. Press SEQ again to stop sequential viewing. Sequence
settings are programmable via the Menu.
6. MENU BUTTON
Pushing this button brings up the Main Menu.
7. EVENT BUTTON
Pressing this button brings up a list of up to 1000 Events, including Power, Loss and
Alarms.
You can scroll through Events using the
▲
and
▼
keys, and navigate between Pages of
Events using the
◄
and
►
keys. Press CH5 / ENTER Button to exit the Event list.
The following letters represent the different types of Events that you may find listed:
P
:
Shows the time when the POWER was turned ON
A
:
Shows the time when a PIR ALARM was triggered
M
:
Shows the time when Pixel-based MOTION detection was triggered
L
:
Shows when a Video LOSS from a Camera occurred
N
:
Starting time of storing data with Manual recording.
H
:
Time of problem occurring in HDD.
8. SEARCH BUTTON
D i g i m e r g e T e c h n o l o g i e s I n c .
3 0 0 A l d e n R o a d
•
M a r k h a m
•
O n t a r i o
•
C a n a d a
•
L 3 R 4 C 1
t e l : ( 9 0 5 ) 9 4 6 - 8 4 7 7
•
f a x : ( 9 0 5 ) 9 4 7 - 0 1 3 8
9
