User’s Manual
DHT 300 SERIES
NTSC Version
10
PAN/TILT ZOOM
The DVR is equipped with a built-in Pan/Tilt Zoom feature, which is only available when used in
conjunction with a compatible Pan/Tilt Dome camera.
The Pan/Tilt Zoom feature supports “Pelco D” protocol.
To access and operate the PTZ feature, follow these instructions:
1
Connect a compatible Pan/Tilt Zoom Dome camera to the CH 1 camera input.
2
Enter the Pan/Tilt Zoom mode by holding the PAN/TILT key on the DVR, or press
the Pan/Tilt button on the remote control
3
You will see a contracted screen with a blue border.
4
Use the Arrow keys to sideways, and
↵
Button to select whether to MOVE and
ZOOM the camera.
5
If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all
directions. If you selected ZOOM, use the arrow keys to Zoom IN / OUT.
6
Select and press
↵
on the EXIT option to escape Pan/Tilt mode.
NOTE:
The system automatically exits Pan/Tilt mode after 20 seconds of inactivity.
Refer to the diagram below for an illustration of Pan/Tilt Zoom mode.
[CH1 PAN/TILT MODE]
MOVE ZOOM FOCUS EXIT
D i g i m e r g e T e c h n o l o g i e s I n c .
3 0 0 A l d e n R o a d
•
M a r k h a m
•
O n t a r i o
•
C a n a d a
•
L 3 R 4 C 1
t e l : ( 9 0 5 ) 9 4 6 - 8 4 7 7
•
f a x : ( 9 0 5 ) 9 4 7 - 0 1 3 8
25
