User’s Manual
DHT 300 SERIES
NTSC Version
4
GETTING STARTED
1
Connect the AC Power Cord to the AC Input of the DHT300 Series and plug into
an electrical outlet. Connect the cameras into the camera inputs (BNC) found on the back
of the Unit.
Plug one end of the Ethernet cable into the Ethernet Port of the DHT300 series and the
other end into an open Ethernet port of the router.
Turn the Main Power Switch ON.
When power is applied, the unit will go through an internal diagnostic test. You will see…
followed by…
System Check…..
then..
*** MASTER HDD DETECT ***
POWER ON CHECK _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _OK
HDD IDENTIFY CHECK _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ OK
HDD R/W CHECK _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _OK
MODEL : XXXXXXXXXXXXXXXXXXXXXX
HDD LBA : XXXXXXXXXXXXXXXXXXXXXX
HDD SPACE : 160 GB
100 %
Dynamic IP Request . . OK
D i g i m e r g e T e c h n o l o g i e s I n c .
3 0 0 A l d e n R o a d
•
M a r k h a m
•
O n t a r i o
•
C a n a d a
•
L 3 R 4 C 1
t e l : ( 9 0 5 ) 9 4 6 - 8 4 7 7
•
f a x : ( 9 0 5 ) 9 4 7 - 0 1 3 8
5
