User’s Manual
DHT 300 SERIES
NTSC Version
b) CH 1-9 : Set the length of alarm time for each channel between 1~59 seconds.
Additionally, you can select the Alarm Input. The default setting is OFF - to activate the
Alarm on a camera, change the setting to N/O (Normally Open), N/C (Normally Close).
NOTE:
Some alternative brand PIR motion sensors have a default setting of N.C
(normally closed). In order to activate the alarm on such a PIR motion sensor, change
the setting to N.C
7.5 MOTION
SET
This submenu allows you to enable / disable the Pixel-based Motion Detection function
by channel and set its Sensitivity level.
a) MOTION : Selecting [OFF] disables the Pixel-based Motion Detection function.
Selecting [OSD] will allow motion to trigger alarms, and the letters “MD” will appear on
the screen of the camera location where the motion is taking place. A third option,
[OSD+BUZZER] will display “MD” and emit a buzzer sound in the event that motion is
detected.
b)CHANNEL : Select which channels will have the Pixel Motion Sensing feature activated.
The Sensitivity level can be set to zero for a channel, which will disable the Motion
Sensing ability for that channel.
c) SENSITIVITY : Select the sensitivity level by channel. Level 05 is the highest
sensitivity, Level 01 is the least sensitive. Level 00 deactivates Motion Sensing.
d) AREA : Select the area of the screen where the Pixel Motion Sensing feature will be
active. The digits below represent the area on the screen where motion is detected.
[00] - Whole screen.
[01] - Top left side of screen.
[02] - Top right side of screen.
[03] - Bottom left side of screen.
[04] - Bottom right side of screen.
[05] - Center of the screen
.
D i g i m e r g e T e c h n o l o g i e s I n c .
3 0 0 A l d e n R o a d
•
M a r k h a m
•
O n t a r i o
•
C a n a d a
•
L 3 R 4 C 1
t e l : ( 9 0 5 ) 9 4 6 - 8 4 7 7
•
f a x : ( 9 0 5 ) 9 4 7 - 0 1 3 8
18
7.6 SYSTEM SET (I)
This sub-menu allows you to configure various preferences on the system, related to
Monitor settings.
a) KEY BUZZER : When set to [Y], the system will make a sound when a key is pressed
on the remote control or on the main panel of the monitor.
b) LOSS BUZZER : When set to [Y], the system will make a sound when a camera
becomes disconnected.
c) QUAD LINE : Activates and deactivates the border line in Quad mode.
d) BLANK COLOR : Choose between blue, gray or black as the background screen color
in Menu Mode.
e)TITLE/TIME : Change the location of on-screen display for Time/Date and camera titles.
T/R/B/L represents Top / Right / Bottom / Left respectively. Therefore, for example,
the setting “TR/BL” would display the Title in the Top-Right corner of the screen, and
the Time in the Bottom Left corner.
00
02
03
01
05
04
