Digi XGI-20CZ7-E00-W0, Руководство пользователя

Страница: 95 / 153

Configure XBee Industrial Gateway Ethernet IP network settings
Digi XBee Industrial Gateway 95
n
Use the following IP address : Specify a static IP address for XBee Industrial Gateway,
consisting of the following:
l
IP Address : The IP address assigned to network devices.
l
Subnet Mask : The subnet mask assigned to the device. The subnet mask is combined with
the IP address to determine which network this Digi device is part of.
l
Default Gateway : The IP address of the computer that enables this Digi device to access
other networks, such as the Internet.
Advanced Settings
n
Interface enable : Enables or disables the Ethernet network interface.
n
Auto IP enable : Enables or disables use of AutoIP address assignment. When AutoIP is
enabled, XBee Industrial Gateway automatically self-configures an IP address when an address
is not available from other methods. For example, when the Digi device is configured for DHCP
and a DHCP server is not currently available. For more information on AutoIP, see RFC 3927,
Dynamic Configuration of IPv4 Link-Local Addresses .
n
Source route enable : Enables or disables source routing to specify a route through the
network.
Ethernet Network Configuration page
The following list describes the Ethernet network settings the Ethernet Network page by section.
Note The Ethernet Network page is only available for Wi-Fi models.
Current IP Parameters
This section displays the active Ethernet IP parameters for XBee Industrial Gateway.
n
IP Address : The IP address assigned to network devices.
n
Subnet Mask : The subnet mask assigned to the device. The subnet mask is combined with the
IP address to determine which network this Digi device is part of.
n
Default Gateway : The IP address of the computer that enables this Digi device to access other
networks, such as the Internet.