Digi XGI-20CZ7-E00-W0, Руководство пользователя

Страница: 116 / 153

Configure XBee Industrial Gateway Network Failover settings
Digi XBee Industrial Gateway 116
n
Latitude : Defines the latitude component of the Digi device, in degrees. The value can range
from -90.0 to 90.0 degrees.
n
Longitude : Defines the longitude component of the Digi device, in degrees. The value can
range from -180.0 to 180.0 degrees.
Network Failover settings
You can use the network failover feature to configure a cellular data connection as a backup to an
Ethernet connection. An Ethernet connection is normally used to route Remote Manager connections
or other application data. If the Ethernet connection stops working, data is routed over the cellular
connection instead. A configurable link integrity test determines if Ethernet is functional.
n
Configure network failover on the XBee Industrial Gateway web interface
n
Configure network failover in Remote Manager
Configure network failover on the XBee Industrial Gateway web
interface
You can configure network failover in web interface.
1. Access the web interface .
2. From the XBee Industrial Gateway web interface, click Configuration > SureLink .
3. Determine the network priority. By default, the Ethernet option should be the first option on
the list. If it is not, follow the process below to move the Ethernet option to top priority.
a. In the Network priority window, click on the Ethernet option.
b. Click the up and down arrows next to the window to move the Ethernet option to
the top of the list. The Mobile option automatically becomes the second option in
the list.
4. Select the When a link integrity test fails, switch to the lower priority network option to
enable failover.
5. Click on the Ethernet Link Integrity Monitoring section.
a. Click the Enable option.
b. From the test type options, select the test type that you want to use.
o
For information about the test type options, see Link integrity test options .
o
For information about how these options work with failover, see Link
integrity test options and failover .
c. Enter a primary test host name in the Primary Test Hostname field.
d. Optionally, enter a secondary test host name in the Secondary Test Hostname
field.
6. Click Apply to save your changes.
Configure network failover in Remote Manager
You can configure network failover in Remote Manager.