Configure XBee Industrial Gateway
Ethernet IP network settings
Digi XBee Industrial Gateway
94
Default Ethernet settings
For Ethernet networks, the default configuration for the Ethernet model of the XBee Industrial
Gateway allows you to power up the XBee device and join an Ethernet network without any additional
configuration. In this default configuration:
n
XBee Industrial Gateway uses a DHCP server to obtain its IP address information. A DHCP
server needs to provide an IP address, subnet mask, default gateway, and Domain Name
System (DNS) server for the device. If you disable DHCP, you must set all of these IP address
settings yourself. In the absence of a DHCP server, you need to assign a static IP address using
the Digi Device Discovery Utility and changing the network settings through the web interface.
n
The default behavior regarding
, and
all proceed as described.
If your Ethernet network configuration does not match these default behaviors, you need to adjust
the Ethernet network configuration settings. See
for more information.
Configuring Ethernet Settings
To configure Ethernet settings, choose one of the following options:
From Remote Manager
1. Click the
Device Management
tab.
2. From the device list, double-click the device to display the device properties menu.
3. Click the
Ethernet (eth)0
properties. The
Ethernet (etho)
page appears.
4.
and click
Save
to save your changes.
From the XBee Industrial Gateway web interface
1. Select
Configuration
>
Ethernet Network
to access the Ethernet IP network settings.
2.
and click
Apply
to save your changes.
Ethernet Configuration page
The following list describes the Ethernet network settings in the
Ethernet (eth0)
page:
IP Settings
You can set the IP address for XBee Industrial Gateway either automatically, using DHCP, or by
assigning a static IP address. You must enable either the
Obtain an IP address automatically using
DHCP
or the
Use the following IP address
option.
n
Obtain an IP address automatically using DHCP
: Select this option to enable DHCP to
assign an IP address to the gateway. XBee Industrial Gateway uses a DHCP server to obtain its
IP address information, by default. A DHCP server needs to provide an IP address, subnet
mask, default gateway, and Domain Name System (DNS) server for the device. If you disable
DHCP, you must select the
Use the following IP address
option and configure these settings
manually.
Содержание XGI-20CZ7-E00-W0
Страница 1: ...Digi XBee Industrial Gateway User Guide...
