Digi XGI-20CZ7-E00-W0, Руководство пользователя

Страница: 117 / 153

Configure XBee Industrial Gateway Network Failover settings
Digi XBee Industrial Gateway 117
1. Access Remote Manager and log in.
2. Click the Device Management tab.
3. From the list of devices, double-click on an XBee Industrial Gateway Cellular model device.
4. Enable network failover.
a. Click Advanced Configuration > Network Failover . The Network Failover page
appears.
b. Click the Failover enable: On option.
c. Click Save to save your changes.
5. Configure the Ethernet network connection.
a. Click Ethernet (eth0) to configure the Ethernet settings.
b. Complete the fields. See Ethernet Configuration page for information about the
fields.
c. Click Save to save your changes
6. Configure a link test for the Ethernet network connection.
a. Click Advanced Configuration > SureLink > SureLink eth0 . The SureLink eth0
page appears.
b. Complete the fields. See Ethernet SureLink settings for information about the
fields.
Note When selecting the test type option, see Link integrity test options and failover for
information about how each option works with failover.
a. Click Save to save your changes.
7. Configure the network priority. The Ethernet connection should have a higher priority. The
cellular network connect is configured as a backup to an Ethernet connection.
a. Click Ethernet (eth0) . The Ethernet (eth0) page displays.
b. In the Default route metric field, specify a metric.
c. Click Save to save your changes.
d. Click Mobile . The Mobile page displays.
e. In the Default route metric field, specify a metric. The metric must have a higher
value than the metric specified in the Ethernet (eth0) page to ensure that the
cellular connection has a lower priority.
f. Click Save to save your changes.
Link integrity test options and failover
When you configure failover, you must select a test type option, which is used to verify link integrity for
failover.
n
Ping
n
TCP Connection