Applications
Configure scripts to run automatically
Digi Connect EZ Mini User Guide
361
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Add a script:
(config)> add system schedule script end
(config system schedule script 0)>
Scheduled scripts are enabled by default. To disable:
(config system schedule script 0)> enable false
(config system schedule script 0)>
4. (Optional) Provide a label for the script.
(config system schedule script 0)> label
value
(config system schedule script 0)>
where
value
is any string. if spaces are used, enclose
value
within double quotes.
5. Set the mode that will be used to run the script:
(config system schedule script 0)> when
mode
(config system schedule script 0)>
where
mode
is one of the following:
n
boot
: The script will run once each time the device boots.
l
If
boot
is selected, set the action that will be taken when the script completes:
(config system schedule script 0)> exit_action
action
(config system schedule script 0)>
where
action
is one of the following:
o
none
: Action taken when the script exits.
o
restart
: Runs the script repeatedly.
o
reboot
: The device will reboot when the script completes.
n
interval
: The script will start running at the specified interval, within 30 seconds after
the configuration change is saved. If
interval
is selected:
l
Set the interval:
(config system schedule script 0)> on_interval
value
(config system schedule script 0)>
where
value
is any number of weeks, days, hours, minutes, or seconds, and takes
the format
number
{
w|d|h|m|s
}.
For example, to set
on_interval
to ten minutes, enter either
10m
or
600s
:
(config system schedule script 0)> on_interval
600s
(config system schedule script 0)>
