Applications
Configure scripts to run automatically
Digi Connect EZ Mini User Guide
359
Task two: Configure the application to run automatically
Note
This feature does not provide syntax or error checking. Certain commands can render the device
inoperable. Use with care.
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
System
>
Scheduled tasks
>
Custom scripts
.
4. For
Add Script
, click
.
The script configuration window is displayed.
Custom scripts are enabled by default. To disable, click
Enable
to toggle off.
5. (Optional) For
Label
, provide a label for the script.
6. For
Run mode
, select the mode that will be used to run the script. Available options are:
n
On boot
: The script will run once each time the device boots.
l
If
On boot
is selected, select the action that will be taken when the script completes
in
Exit action
. Available options are:
o
None
: Action taken when the script exits.
o
Restart script
: Runs the script repeatedly.
o
Reboot
: The device will reboot when the script completes.
n
Interval
: The script will start running at the specified interval, within 30 seconds after
the configuration change is saved.
