Virtual Private Networks (VPN)
L2TP
Digi Connect EZ Mini User Guide
224
n
For L2TP network servers:
l
The Authentication method.
l
The metric for the tunnel.
l
Enable custom PPP configuration options for the tunnel.
o
Whether to override the default configuration and only use the custom options.
o
Optional configuration data in the format of a pppd options file.
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
VPN
>
L2TP
.
4. (Optional) Type the
UDP listening port
that L2TP servers will listen on, if other than the
default of
1701
.
5. Set the access control for L2TP tunnels:
n
To limit access to specified IPv4 addresses and networks:
a. Click
IPv4 Addresses
.
b. For
Add Address
, click
.
c. For
Address
, enter the IPv4 address or network that can access the device's
service-type. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any
: No limit to IPv4 addresses that can access the service-type.
d. Click
again to list additional IP addresses or networks.
n
To limit access to specified IPv6 addresses and networks:
a. Click
IPv6 Addresses
.
b. For
Add Address
, click
.
c. For
Address
, enter the IPv6 address or network that can access the device's
service-type. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any
: No limit to IPv6 addresses that can access the service-type.
d. Click
again to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the Connect EZ
device:
