Dietz Sango Advanced F Скачать руководство пользователя

Страница: 21 / 44

6 Wheelchair adjustments

Wheelchair adjustments are those components that the user can adjust without

the use of tools. The wheelchair may be fitted with powered and/or mechanical

adjustment options.

Warning

•

The centre of gravity is affected when adjustments are made. Adjustments

should therefore only be made when the wheelchair is on a flat surface.

• Powered adjustments involve parts of the wheelchair moving and/or rotating.

Contact with such moving parts may result in serious physical injury or damage

to the wheelchair. You should avoid any contact with the moving parts of the

wheelchair.

• When adjustments are made, the standard size of the wheelchair increases.

Make sure that the wheelchair does not block any escape routes.

6.1. Powered adjustments

CONTROLLER how to operate the powered adjustments by use of the controller.

The following powered adjustments are possible:

Adjustment Neutral

position

Adjustment Neutral

position

Adjustable seat tilt

Adjustable footrest extended

Entire seat

will tilt

forwards/

backwards.

Upright

The legrest

length will

increase/

decrease.

Close to

the feet

Adjustable seat lift

Adjustable footrest lift

Entire seat

will be

lowered/

raised.

Lowest

position

The legrest

angle will

increase/

decrease.

Vertical

possible

Adjustable backrest recline

Footrest length compensating

The

backrest

will tilt

forwards/

backwards.

Upright

The legrest

length and

angle will

increase/

decrease

Vertical

possible

SANGO ADVANCED / SLIMLINE - 21

6 Wheelchair adjustments

Содержание Sango Advanced F













































Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды

Dietz Sango Advanced F, Руководство пользователя

Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды