Dietz Sango Advanced F Скачать руководство пользователя

Страница: 6 / 44

2 Safety

All of the very latest information relating to product safety and any product recalls

can be found on our website at www.DIETZ-Power.com.

Warning

Follow the instructions given under warnings! Failure to exercise due care in

following these instructions may result in physical injury, damage to the wheelchair

or damage to the environment.

2.1. Temperature

Warning

• Avoid any physical contact with the motors of the wheelchair at all times. When

the wheelchair is in use, the motors are in constant motion and can reach high

temperatures. Any physical contact with the motors could result in burns. After

use, the motors cool down slowly.

• Ensure that the wheelchair is not exposed to direct sunlight for long periods of

time when not in use. Some parts of the wheelchair (such as the seat, backrest

and armrests) can become hot if exposed to the sun for too long. This may

result in burns or skin sensitisation.

2.2. Moving parts

Warning

Wheelchairs contain moving and rotating parts (figure 1). Contact with moving

parts may result in serious physical injury or damage to the wheelchair. You should

avoid any contact with the moving parts of the wheelchair.

A. Wheels (turning and pivoting)

B. Swing-away controller arm

C. Powered backrest adjustment

D. Powered tilt adjustment

E. Powered leg rests

F. Powered lift adjustment

6 - SANGO ADVANCED / SLIMLINE

2 Safety

Содержание Sango Advanced F













































Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды

Dietz Sango Advanced F, Руководство пользователя

Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды