8.2. The wheelchair as a
driver’s seat in a car with
Dahl docking system
(option)
Securing the wheelchair (figure 39)
1. Drive the wheelchair into the car
docking station (A). When the
wheelchair is correctly positioned, the
locking plate that is mounted under
the wheelchair automatically clicks into
the docking station.
2. The LED light (B) on the control panel
indicates that the wheelchair is locked
and remains as long as the locking
plate is in the docking station.
Warning
•
A crash test with Dahl was performed on this wheelchair according to ISO 7176-
19 (2008) with a dummy weight of max. 77 kg.
• The docking station must always be clean, free of durt and there must be no
objects that may obstruct the locking of the locking plate in the docking station.
• The wheelchair must always be secured according to current regulations. The
docking system must be checked regularly and must be replaced if damaged.
• A warning tone sounds when the lock plate is not properly locked in the
docking station.
Unlock the wheelchair
To unlock commence by driving the wheelchair forward to release pressure on
the lock pin and press the release button (C). Do not attempt to reverse out of the
docking station until the red LED on the control module (F), which indicates the
unlock position, has been illuminated. Attempting to reverse the wheelchair before
the red LED has been illuminated will result in blocking the docking stations lock
mechanism which makes it impossible to reverse. If this happens repeat above
unlocking procedure.
In case of power failure use the manual release lever (D or E).
30 - SANGO ADVANCED / SLIMLINE
A
B
C
D
E
F
39
