Dibo 1.780.290, Руководство пользователя

Страница: 139 / 214

AC T I VAT I O N
EN
DiBO 33
4 Electrical connection
Connection diagram for 7- pole plug:
INDICATION COLOUR NAME
L yellow left indicator
54G blue fog lamp
31 white mass
R green right indicator
58R brown right rear light
54 red
brake lights : left &
right
58L black left rear ligh
Connection diagram for 13- pole plug:
NUMBER COLOUR NAME
1 yellow left indicator
2 blue fog lamp
3 white mass (for poles 1-8)
4 green right indicator
5 brown right rear light
6 red
brake lights : left &
right
7 black left rear light
8 grey reversing light
9
10
11
12
13 white/black mass (for poles 9-12)
BREAK TIME
The spraying can be stopped arbitrarily by releasing the handle from the spray
gun. Next acts one must comply, if the spraying pause last longer than ten
minutes (or by abandoning the working area):
• After cleaning at use of the burner, the temperature must be 0°C (or set below
the actual value) and you have to spray during at least an other 5 minutes for
cooling down the burner sufficiently.
• When you decide to switch between low pressure function (high temperature)
and high pressure function: rince with cold water during 10 minutes (cooling
down).
• Switch off the machine completely. Put therefore the key contact to position
“0”.
• Release the pressure of the pressure hose by pushing the handle of the spray
gun for a moment.
PUMPS HT
There must be present a pre - pressure (pump) at HT pumps (pumps with high
temperature). The pre - pressure (pump) must provide for sufficient flow of
water to feed the high pressure pump and to occur cavitation. Cavitation is
the phenomenon that in a moving fluid the local pressure is going to be lower
than the vapour pressure of the fluid. Because of this mist bells will arise who
can implode with high power in the pump and could cause damages. For all
these applications at high temperature, it is ABSOLUTELY ESSENTIAL to feed
the pump with positive pressure (at least 3 bar) and with a sufficient quantity of
water.