Diagraph LA/4700, Руководство пользователя, Страница: 8 / 69

Diagraph - an ITW Company LA/4700 User Manual - Revision B
System Modules Page 7
System Modules
Drive Roller P/N: 4700-630 (W)
Nip Assembly Kit P/N: 4700-952 (W)
Snorkel Assembly Kit P/N: 4700-950 (W)(RH/LH)
The drive roller is a subcomponent of the
Servo Assembly. This roller is made of
polyurethane and is responsible for
advancing the label liner through the
applicator. This is a wear item that can be
obtained individually. There are two
versions of this component:
•
5 inch shaft P/N: 4700 ‐ 630
•
9 inch shaft P/N: 4700 ‐ 630W
The nip assembly holds the label liner in
constant contact with the drive roller. It uses
a non ‐ stick coating to avoid label build ‐ up.
This assembly includes the nip lever arm,
knob, pivot block, and nip roller.
•
5 inch shaft P/N: 4700 ‐ 952
•
9 inch shaft P/N: 4700 ‐ 952W
The snorkel assembly is used for wipe ‐ on
applications. It contains the label gap sensor,
support arms and brackets, peel blade
support, and peel blade. There are four
versions of this assembly:
•
5 inch wide, right ‐ hand P/N: 4700 ‐ 950 ‐ RH
•
5 inch wide, left ‐ hand P/N:4700 ‐ 950 ‐ LH
•
9 inch wide, right ‐ hand P/N: 4700 ‐ 950W ‐ RH
•
9 inch wide, left ‐ hand P/N: 4700 ‐ 950W ‐ LH