Diagraph LA/4700, Руководство пользователя, Страница: 23 / 69

Step 7 - Enter Values for the Job Settings
Goal:
Enter Job setting values to control specific aspects of the product label application
Map:
Beginning in the Offline mode, press the Settings button. From the Settings Menu, which
can be passcode protected (default passcode from the factory is 9999), select the Job
button choice. This enters the Job Menu selections. See section
Job Settings Screens on
page 36
for information on how to make these selections.
Wipe or WASA System
For a typical one wipe application, the following settings provide a good start:
Tamp or FASA System
For a typical one tamp application, the following settings provide a good start:
•
Product Delay
100 mS
•
Dispense Position
0.50 inches
•
Feed Speed
50 FPM
† = Only visible if Auto-Retract is installed
‡ = Only visible if Label Present is installed
•
Product Delay
100 mS
•
Repeat Label ‡
3
•
Tamp Duration
250 mS
•
Repeat Tamp ‡
3
•
Home Delay
50 mS
•
Feed Activation
Tamp Return
•
Auto Retract † 25 mS
Diagraph - an ITW Company LA/4700 User Manual - Revision B
Setup Page 22
Setup