Diagraph LA/4700, Руководство пользователя, Страница: 27 / 69

** Step 11 -
Adjust the Wipe-On Snorkel
Goal:
Adjust the wipe-on angle of the label and set the optimum brush position.
•••• Sub-Step (a) ••••
[1] Use a
5
/
32
inch Allen wrench to adjust the two (2)
screws (
one shown in A and one on opposite side
) to
change the peel blade angle
[2] Set the peel blade to a 45° angle to the product.
Tighten the Allen screws
•••• Sub-Step (b) ••••
[1] Loosen the outer guide collar with the knurled screw
(
shown in B
)
[2] Position the liner close to the inner guide and slide the
outer guide (B) to the edge of the liner and tighten
the knurled screw
•••• Sub-Step (c) ••••
[1] Loosen knob [C] and adjust the brush clamp across
the label width to the mid position. Tighten the knob
[2] Loosen knob [D] and adjust the angle and forward
position of the brush. For shorter length labels,
position the brush closer to the peel edge, 90° to
the product’s surface. For longer labels, position the
brush away from the edge, 45° to the product’s
edge
[3] Tighten the knob and re-position the handle out of
the way of the application
WIPE
Diagraph - an ITW Company LA/4700 User Manual - Revision B
Setup Page 26
Setup