Diagraph LA/4700, Руководство пользователя, Страница: 3 / 69

Diagraph - an ITW Company LA/4700 User Manual - Revision B
Introduction Page 2
Intr
oduction
1.0 Introduction
1.1 The LA/4700 Label Applicators
The LA/4700 is a second generation, next label out, labeling system designed for modularity,
continuous labeling, self-diagnostics, and ease of use. Modularity of design provides the basis
for ease of installation, setup, and maintenance. The electronics system employs a hardware-
specific design, thus increasing reliability and throughput. The hardware was developed to
simplify construction, and increase longevity by using durable materials. This unit will perform
24/7 operation in harsh environments and operate trouble-free, given that the appropriate pre-
ventative maintenance is performed on regular service intervals.
1.2 Product Safety
Safety awareness is critical when working with equipment that contains moving parts and
extending pneumatic cylinders. Please read all warnings and cautions thoroughly before
operating this device.
This product meets the requirements of CAN/CSA-22.2 NO.60950-00 * UL 60950 using
Diagraph, an ITW Company, approved items. Units are only tested and qualified with Diagraph
an ITW Company approved parts and accessories.
Use of other parts or accessories may
introduce potential risks that Diagraph, an ITW Company, can assume no liability for.
WARNINGS
• WARNING - Moving parts of this machine can present hazards. Components
that cannot be guarded because of loss of functionality are marked with a
warning symbol.
• Be aware of the tamp cylinder extension distance, and avoid accidental trig-
gering of the photosensor.
• When servicing the unit’s electronic assemblies, always remove the power
cord from the unit to prevent accidental shock.
• When running for extended periods of time, use caution when accessing the
drive module circuitry. The motor drive power transistors, motor case, and
motor heatsink can become hot under constant use.
• Always close the air inlet valve shutoff when removing or servicing pneu-
matic module or tamp cylinder.
• Wear personal protective equipment, as instructed by your supervisor, when
operating or working near this device.
COMPLIANCE
• CAUTION: Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/ Data Processing Equipment, ANSI/
NFPA 75.