15
Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to
observe the following important points. Failure to observe these points may not only result in
loss of performance but may cause faulty operation or a malfunction.
This Machine Is a Precision Device
• Handle carefully, and never subject the machine to impacts or excessive force.
• Never attempt to imprint material that is not covered by the specifications.
Install in a Suitable Location
• Install in a location that meets the specified conditions for temperature, relative humidity, and the like.
• Install in a stable location offering good operating conditions.
• Never install in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing so
may cause poor switch contact.
Moving the Machine
• When moving the machine, be sure to support it at the bottom using two hands. Attempting to move
the machine by holding it at a different location may result in damage.
• When moving the machine, be sure to attach the base unit and the retainers. In particular, moving the
machine without attaching the retaining materials may result in damage. Be sure to also remove included
items such as material retainers and the grid table.
"
About Imprinting
• Never attempt to imprint on the areas of a material that have lines or holes.
• Imprint results will vary according to the hardness of the material. Before performing actual imprinting,
we recommend carrying out a test imprint.
• Repeatedly performing imprinting with no material loaded can lead to pin damage and head malfunctions.
