Troubleshooting
The Image Is Always Faint at the Same Location.
Is a change in the height of
the imprint surface too tall?
If the image is always faint at the same location even though
you’re performing imprinting using a head cap, the imprint
surface may have an excessive height displacement. Recheck
the requirements for the material that can be imprinted by the
machine and select a material that meets the requirements. Also,
image quality is not assured when imprinting photographic data
on a curved surface with this machine.
P. 42 "Preparing the Material"
The machine may tilt slightly.
If the image is often faint at the same location, such as near the
front right area of the grid table, the machine may tilt slightly.
Adjusting the levelness of the machine may improve the image
quality. Adjust the levelness of the machine according to the
following procedure.
Please note that this is not effective when unevenness in the
image is unrelated to the imprint location, such as when uneven
areas vary from one piece of material or image to another. We
recommend using a head cap whenever possible.
Adjusting the Machine Angle
Procedure
A
Mount the included test material on the grid table.
• Using the adhesive sheet, set it in the center of the grid table.
• If the included material has been used up, then prepare a piece of material that is
larger than 60 mm (2.4 in.) and has a smoothness of 0.05 mm (0.002 in.) or less.
• Perform imprinting without using the head cap.
"
B
Display the printer icon.
Windows 10 and 8.1
1
3. Right-click the [Start] menu on the computer.
2
Click [Control Panel].
3
Click [View devices and printers] or [Devices and Printers].
Windows 7
1
Click the [Start] menu.
2
Click [Devices and Printers].
4
Trouble
-
shooting
123
