DFI CW65 Series, Руководство пользователя, Страница: 8 / 73

Introduction
1
8
ACPI
The system board is designed to meet the ACPI (Advanced Configuration and
Power Interface) specification. ACPI has energy saving features that enables PCs
to implement Power Management and Plug-and-Play with operating systems that
support OS Direct Power Management. Currently, only Windows
®
98 supports
the ACPI function. ACPI when enabled in the Power Management Setup will allow
you to use the Suspend to RAM function.
With the Suspend to RAM function enabled, you can power-off the system at
once by pressing the power button or selecting “Standby” when you shut down
Windows
®
98 without having to go through the sometimes tiresome process of
closing files, applications and operating system. This is because the system is
capable of storing all programs and data files during the entire operating session
into RAM (Random Access Memory) when it powers-off. The operating session
will resume exactly where you left off the next time you power-on the system.
Refer to “Using the Suspend to RAM Function” in chapter 3 for more
information.
Important:
If you are using the (1) Suspend to RAM, (2) Wake-On-Keyboard/Mouse and
(3) Wake-On-LAN functions all at the same time, the 5VSB power source of
your power supply must support a minimum of
≥
1A. A
≥
720mA 5VSB
power source is sufficient if you are using only one or two of these functions.
Virus Protection
Most viruses today destroy data stored in hard drives. The system board is
designed to protect the boot sector and partition table of your hard disk drive.
1.1.1 Caractéristiques
Chipset
• Intel
®
810-E (CW65-E)
Intel
®
810 DC-100 (CW65-D)
Intel
®
810 (CW65-S)
Intel
®
810-L (CW65-L)
Processeur
La carte système est équipée d’un régulateur de commutation de voltage qui
détecte automatiquement de 1.30V à 2.05V.
• Pentium
® III FCPGA 133MHz FSB (533EB-866EB) processeur (CW65-E)
• Pentium
®
III FCPGA 100MHz FSB (500E-700E) processeur
• Celeron
TM
66MHz FSB: FCPGA (566MHz-600MHz) ou PPGA (300A-
533MHz) processeur
Mémoire Système
• Mémoire allant de 16Mo à 256Mo/512Mo utilisant la technologie DIMM
sans mémoire tampon de 64Mo/128Mo. (Vous devez utiliser des DIMM
SDRAM 32Mox64 pour supporter la mémoire de 512Mo.)
• Deux sockets DIMM 168 broches.
• Utilise x64 DIMM SDRAM PC-100, 3.3V
Français
DIMMs
2MBx64
4MBx64
8MBx64
Mémoire
16MB
32MB
64MB
DIMMs
16MBx64
32MBx64
Mémoire
128MB
256MB