DFC NSV-400, Руководство по эксплуатации и технические характеристики

Страница: 9 / 26

10

Maximum cutting width – please refer to the original specification

Cut length repeatable accuracy

1mm.

Band/sleeve positional accuracy on product in the vertical plane 1mm prior to shrinking.
1.4.5 F
ULL
S
POOL
U
NWIND

The Full Spool Unwind is controlled by a photo electric switch which via the programmable
logic controller, operates a A.C. motor driven feed controller which creates slack web to feed
the cutting head.

Full spool diameter – 500mm maximum.

Core size – 101mm, or as per specified in your order.

Lay-flat width – as per specified in your order.
1.4.6 O
PTIONS
Conveyor Belt

Conveyor lengths of 5 meters.

Conveyor slat width of 100mm in either stainless steel or acetal.

Conveyor motor – ½ HP Permanent Magnet A.C. as standard.

Conveyor speed can vary.

Conveyor must not be subject to extreme vibration.
Product Pitching
Product can be pitched, where required, by scrolls mounted on the conveyor.
Product Centralizing

Product can be centralized, where required, by a double belt centralizer unit mounted to the
conveyor.

The machine is not protected from build back of product from a subsequent machine.

A constant flow of product is needed. No undue pressure of product must be allowed to
affect the operation of the pitching/centralizer mechanisms.
Heat Tunnels

Shrinking is achieved by hot air, manifold through a series of outlets (nozzles) designed to
suit the product. Heat tunnels are constructed on adjustable frame work systems which fits
around the conveyor belt.

Maximum product diameter: 102mm

Maximum product height: 350mm.
Wipedown

Wipdedown for banding operations is normally achieved by a metal skid plate which pushes
the banding material down short distances securely onto the product.

Often for sleeving, wipedown is achieved by rotating brushes with soft rubber flails or bands.