DFC NSV-400, Руководство по эксплуатации и технические характеристики

Страница: 16 / 26

17
2.5 W
IPEDOWN
S
YSTEMS

The core mechanics of the system is to wipedown the sleeves with rotating soft rubber flails
mounted on a motor.

Either one or a pair of handed wipedown(brushes) units are mounted to the conveyor
immediately after the sleeve is applied onto the product as it passes along the conveyor.

The wipedowns can be adjusted freely horizontally and vertically to suite the product size and
the position of the sleeves.
S
PECIFICATION
Motor - 220 V. A.C, 1800 R.P.M, 6W speed adjustable.
Flail material - PU rubber or elastic rubber bands.
2.6 P
RODUCT
S
ENSOR
U
NIT

Before sleeve application, products are detected as they approach the applicating driver by a
fibre optic photo electric sensor mounted in a necked housing.

The sensor signal initiates the applicating drive, and hence the sensor position is very critical
to the timing of the sequence of operations.

To allow the signal to be advanced or retarded in the sequence the sensor is mounted on an
adjustable block which runs in a leadscrew. Hand adjustments are provided at either end of
the leadscrew to allow accurate positioning of the sensor.

If sleeve application is too early with reference to the product position, then the sensor
should be moved in the direction of the product flow. If the application is too late then the
sensor should be moved against the direction of the product flow