DFC NSV-400, Руководство по эксплуатации и технические характеристики

Страница: 2 / 26

3
I N T R O D U C T I O N
1.1 S
ERVICE
S
UPPORT
If you have any problem or queries regarding our Machinery, please feel free to contact our
department:
DFC Packaging Group of Companies
20 Summit Road, Noble Park 3174
Phone: 9701 2000
Facsimile Number: (03) 9701 2022
1.2 G
ENERAL
I
NFORMATION

This manual has been produced to provide operating and service instructions for the NSV –
400 Sleeving Shrink Sleeve Applicator .

The machine has been designed to feed, cut and apply film bands or sleeves onto product fed
via a conveyor at product rate of up to 250 per minute (Depending on the size and shape of
the product). After application the sleeve/band is wiped down on to the product prior to
entering a heat tunnel.

The products must be pitched before they reach the applicating driver and this can be
achieved by a pitching scroll, rotary drum or other form of pitching devices.

The required product pitch is dependent on the length of the sleeve/band and the longer the
sleeve length the greater the pitch required.

The sleeves/bands are retained on the shooting head (lower part of the mandrel), which is
feed automatically at the placement position.

The length of heat tunnel required to shrink the material tightly onto the product is
dependent on the length of the sleeve/band and the application.

The tunnel may be profiled, via air flow and temperature controls, to optimize the material
shrink.