DFC NSV-400, Руководство по эксплуатации и технические характеристики

Страница: 17 / 26

18
2.7 V
ERTICAL
A
DJUSTMENT
S
YSTEM

The mandrel support, feed driver, knife cutter set and applicating driver are mounted on a
common vertical base plate which is in turn mounted, via low friction bearing blocks, on two
vertical rods. The position of the unit (as high-lighted in the photo) can be adjusted vertically
up and down through a motor; which enables machine to apply products of different label
length.
2.8
C
IRCUITRY
C
ONTROL

All the function provided by the system are all controlled by P.L.C. The P.L.C will perform
accordingly determined by the signal transmitted from the optical sensors. i.e. one from the
product sensor, one from the film register, and one from the cutter.

P.L.C is installed at the rear top-right of the machine.
2.9 P
ITCHING
S
CROLL

Products passing under the sleeving head must be adequately pitched and centrally aligned to
achieve successful sleeve placement.

A helical –plastic scroll provides a method of accepting choke fed products at infeed and
separating and controlling them during sleeving application.

The scroll is rotated by a A.C. motor and gearbox and sprocket drive and abuts the conveyor
side. Such that, the motor speed can be adjusted to pitch at the desiring distance between
each products.

The helical size is portable, and can be changed to suit the product size accordingly.