DFC NSV-400, Руководство по эксплуатации и технические характеристики

Страница: 22 / 26

23
M A I N T E N A N C E

To maintain the machine in good working order and to give maximum performance it is important
to carry out basic servicing on a regular basis.

Before commencing any maintenance program ensures the main power input is.
MAIN MACHINE
4.1 D
AILY
1. Clean the material spool tray with a lint free cloth.
2. Clean the face of the sensor controlling the full spool unwind with a lint free cloth.
3. Check and clean the film slack drive roller rubber drive rings using a dilute detergent and dry
thoroughly. Replace if the rings are worn or damaged.
4.2 W
EEKLY
1. Clean the rubber drive rings of the material full spool feed system with dilute detergent and
dry thoroughly. Replace if worn or damaged.
2. Check all material guide spools for free rotation.
3. Grease the leadscrew of the head vertical adjustment system with White Food Quality
Grease.
4. Check that all mandrel support rollers and feed rollers rotate freely. Lubricate lightly with
silicone spray if necessary.
5. Check the cutting unit by unscrew and take off the plastic cover, clean all debris and dirt on
the plastic and blade. Check if blade is still sharp, change blade if necessary.
4.3 M
ONTHLY
1. Clean the vertical head adjustment guide bars and lubricate lightly with silicone spray.
HEAT TUNNEL UNIT
4.5 D
AILY
1. Check nozzles for obstruction and clean off any misplaced sleeves/bands adhering to the
outlet surface.
2. Check tunnel roof, if fitted, and clean off any misplaced sleeves/bands adhering to the inner
surface.
3. Check inlet to blower unit for obstruction.
4.6 W
EEKLY