Dewetron DEWE-ORION-0824-20 Series Скачать руководство пользователя страница 33

Страница: 33 / 64

Page 33

DE-M080801E • DEWE-ORION-0824-20x • Technical Reference Manual • Printing version 1.1.2 • March 19, 2014

DEWE-ORION-0824-20x

2.8 RS-485 interface

The DEWE-ORION-0824-20x is suited with an RS-485 interfaced as standard. The baud-rate is fixed to

9600, 8 Data, 1 Stop bit and no parity. This interface is used for configuration of the DAQ and MDAQ signal

conditioning modules. Also the acquiring of PAD and EPAD from DEWETRON is possible with this RS-485

port. The interface of the main board and the expansion boards (DEWE-ORION-0824-202 with counter ex-

pansion) is controlled separately.

2.9 Synchronizing multiple devices

2.9.1 Internal synchronisation

For multiple device operation the DEWE-ORION-0824-20x is equipped with an additional synchronization

connector. A standard 10-pin connector with 1.27 mm flat ribbon cable is available for easy connection

between the boards. To reduce electromagnetic influences because of the very high frequency at this

synchronization bus, IEEE 1394 compatible LVDS (low voltage difference signals) are used.
The LVDS interface is current-based. Therefore the last board has to be terminated. This can be done with a

switch, positioned directly below the sync connector.

If you use only one DEWE-ORION-0824-20x in your system, the board has to be terminated.

Termination on
Termination off

DEWE-ORION-0824

Termination off

Slave

Termination on

Master

Содержание DEWE-ORION-0824-20 Series

































































Результаты поиска

Содержание DEWE-ORION-0824-20 Series

Отзывы:

Похожие инструкции для DEWE-ORION-0824-20 Series

Бренды по названию

Популярные бренды

Dewetron DEWE-ORION-0824-20 Series, Техническое справочное руководство

Результаты поиска

Содержание DEWE-ORION-0824-20 Series

Отзывы:

Похожие инструкции для DEWE-ORION-0824-20 Series

Бренды по названию

Популярные бренды