Dewetron DEWE-ORION-0824-20 Series Скачать руководство пользователя страница 32

Страница: 32 / 64

Page 32

DEWE-ORION-0824-20x

EXT_CLKx

internal signal:

ADC sample clock

or 80 MHz

DIR_CLK

internal signal:

CLK1 I/O

DIR_CLK1

EXT_Trigger

internal signal:

start of acquisition

DIR_Trigger

EXT_CLK1

internal signal:

CLK2 I/O

DIR_CLK2

EXT_CLK2

Figure 7: Clock and trigger I/O configuration

The direction (input or output) of each pin can be switched separately.

2.7 CAN interface

As an option the DEWE-ORION-0824-20x also can be suited with two high speed CAN interfaces. Both ports

are compatible with CAN 2.0B specification. The CAN transceiver (TI SN65HVD235) has a bus-pin fault

protection of up to ±36 V.
The main application for these CAN-ports is acquiring CAN data together with analog data. Although the

CAN data is asynchronous to the analog data, the DEWE-ORION-0824-20x series guarantees perfect

synchronization. Each incoming CAN message is directly time stamped to the analog sample count number

before the data is transferred to the application software.
If just CAN acquisition of CAN messages is required the “Listen Only” mode can be used. In this mode the

DEWE-ORION-0824-20x board generates no output data even if the CAN-baud-rate is wrong selected. But

this mode is not working using just a direct connection to a sensor. In a point-to-point connection the “Listen

Only” mode has to be deactivated at the CAN-Interface. The setup in DEWESoft is shown in the screenshot

on the next page.

CAN setup in DEWESoft

Содержание DEWE-ORION-0824-20 Series

































































Результаты поиска

Содержание DEWE-ORION-0824-20 Series

Отзывы:

Бренды по названию

Популярные бренды

Dewetron DEWE-ORION-0824-20 Series, Техническое справочное руководство

Результаты поиска

Содержание DEWE-ORION-0824-20 Series

Отзывы:

Бренды по названию

Популярные бренды