Deutz EMR 2, Описание системы, Страница: 5 / 60

© 06/02
Seite 63
EMR 2
Table of Contents
Contents
Page
1 Introduction
65
2 Important Notes
67
2.1 Operating instructions 67
2.2 Installation guidelines 67
2.3 Damage 67
2.4 Customer side wiring, plug connection 68
2.5 Remove plug 68
2.6 Electrical welding 68
3 System Description
69
3.1 Utilization of the EMR 2 69
3.2 System overview 69
3.3 Description of functions 70
3.4 Basic equipment 70
4 System Functions
71
4.1 Overview features 72
4.2 Function extensions 73
4.3 Speed control 74
4.4 Set point settings 76
4.5 Fuel quantity limitation (performance curve) 77
4.6 Droop control 78
4.7 Engine start/stop 78
4.8 Displays / Outputs (monitoring function) 79
4.9 LDA function 81
4.10 Temperature-dependent start control 81
4.11 Speed throttling (input F 7) 81
4.12 Engine protection functions 81
4.13 Altitude correction 82
4.14 Fuel volume control 82
4.15 Emergency running (limp home) 82
4.16 Cold start installation 82
5 Interfaces
83
5.1 Diagnostic interface (basic function) 83
5.2 CAN-Bus interface 83
6 Configuration and Parameter Setting
85
6.1 Function overview, pin assignment and configuration example 86
7 Diagnostic Button and Fault Indicator Lamp
87
7.1 Self-diagnostic (without operating the diagnostic button) 87
7.2 Diagnostic with Button and Error Code 90
7.3 Diagnostic possibilities with the SERDIA software 98
8 Replacement of system components
99
8.1 Replacement EMR
↔
↔ ↔
↔
EMR 2 99
8.2 Features of the Replacement of the Control Unit 99
8.3 Features of the Replacement of the Actuator 100
8.4 Combination EMR, EMR 2, Control Unit and Actuator 100