Deutz EMR 2, Описание системы, Страница: 10 / 60

1
2
3
4
5
6
7
8
9
10
11
12
12
Seite 68
© 06/02
EMR 2
Important Notes
2.4 Customer side wiring, plug connection
☞
IMPORTANT!
In order to attain the required protection class (IP 66) at the control unit, the individual wire
seals, plugs and sealing rings provided must be used.
☞
IMPORTANT!
The connection between pins and individual wires must only be carried out with the proper
pinching tools.
H
REMARKS!
The voltage supply for inputs and outputs for the users must be able to be switched in a de-
energized manner via the key switch (terminal 15) - not via continuous positive.
2.5 Remove plug
H
REMARKS!
Removing the 25-pole equipment plug and engine plug when the control unit is on, i.e. when
the voltage supply is on (terminal 15 on) is not permitted.
1. Voltage supply off
- only then -
2. pull out equipment plug and engine plug
2.6 Electrical welding
H
REMARKS!
In order to prevent damage when carrying out ELECTRIC welding of the installation, the plug
connections at the control unit must first be pulled out.
H
REMARKS!
The ignition (terminal 15) must be switched off when working at the EMR 2.