Coupling the implement
19
Coupling to the
pending attach-
ment
For coupling onto the pending attachment you require a sustainer [+].
The height of the drawbar is easily adjustable by means of the crank.
The sustainer is removable. On the gearbox at the front there is a hol-
der for parking position while working.
> Relieve the sustainer by means of the crank
> Pull out the pin
> Release the sustainer from the drawbar and lock with pins in par-
king position at the front left on the gear-box
→
Chapter »Accessory equipment«, section »Height adjustable sus-
tainer«, page 58
Adjusting the draw-
bar cylinder (only ver-
sions with stabiliser
[+])
When coupling to the pending attachment the drawbar cylinder must
compensate for any ground undulations if you have a version with the
stabiliser [+]. Adjust the drawbar cylinder as follows:
> Unscrew the spindle on the drawbar cylinder by roughly 20 mm
Spanner size "17" on the spindle
Crank
Gearing
Sustainer
Spindle
20 mm
Drawbar cylinder
All manuals and user guides at all-guides.com
