18
Coupling the implement
Coupling the implement
Increased risk of injury
When coupling the implement to the tractor, there is an increased risk
of injury. Therefore:
•
Secure the tractor in such a way that it cannot roll forwards or back-
wards
•
never stand between the tractor and the implement during coupling
•
Actuate the three-point power lift system slowly and carefully.
If this is not complied with, the consequence can be serious or fatal
injuries.
General
The implement is equipped ex-factory for coupling to the pending at-
tachment or lift link drawbar.
Genuine socket pins from the manufacturer
Use only genuine socket pins from the manufacturer. These have the
required strength. Other pins can break. The consequence can be da-
mage to the implement or an accident.
> Fit the wheel rake by means of socket pins to the lift link drawbar
or pending attachment
> Secure the socket pin with a safety splint
Coupling to the lift
link drawbar
Lock the height adjustment of the lower link
Lock the height adjustment of the lower link Comply with the tractor
operating manual. Accidental lifting of the lower links complete with
the lift link drawbar can destroy the cardan shaft.
Lock the lateral setting of the lower links.
Fix the lower links after coupling the implement. Lateral free move-
ment of the lower links causes unstable drive properties during trans-
port journeys and can cause accidents.
> Fix the lower link height to a distance of roughly 400 mm from the
ground.
N
OTE
The working depth is set via the two chassis, the drawbar cylinder or
the stabiliser [+].
→
Chapter »Preparing for operation«, section »Working depth«, page
24
Safety splint
Socket pin
All manuals and user guides at all-guides.com
