Parking and storage
47
Parking and storage
Safely setting
down the imple-
ment
When setting down and parking the implement special safety precau-
tions have to be observed:
Observe safety instructions
Do not fail to observe the safety instructions when performing all work.
Any disregard for safety instructions can lead to severe or fatal injuries
to persons.
The implement is not a toy
Never allow children to play on or around the implement. Metal edges
and work tools of the implement can cause serious injury.
General
Uncouple the implement in the reverse order to coupling.
→
Chapter »Coupling the implement«, section »Coupling«, page 6
Uncoupling and secu-
ring the implement
To uncouple the tractor from the tractor proceed as follows:
•
Set the implement down on flat and firm ground and lower the im-
plement to working position
•
Leave the swath former in transport position
•
Secure the tractor against rolling away, switch off and take out the
ignition key
•
Secure the implement against rolling away using wheel wedges
•
If the pending attachment is used, fasten the sustainer [+] to the
drawbar, secure it and relieve the drawbar with the sustainer
•
Pull off the cardan shaft and deposit it on the holder provided
•
Close the ball valve
•
Insert the hydraulic couplings into the parking pockets on the im-
plement
•
Disconnect the plugs for the lighting and pilot box
•
Release the pin
After the end of
the season
After the end of the season and if the implement is to be stored for a
long period of time, perform the following work:
> Clean the implement thoroughly
> Check all the screw joints and retighten the screws
> Repair or replace any damaged components
> Repair any paint damage
> Lubricate the implement in accordance with the lubrication schedu-
le
> Check the tyre pressure
All manuals and user guides at all-guides.com
