DEUTZ-FAHR SwatMaster 7131 EVO Скачать руководство пользователя страница 29

Страница: 29 / 65

Driving on the road

Folding in the swath

former

There should be no persons standing in the slewing range

While the swath former is folding inwards no personnel are allowed to

be in the slewing zone. Personnel can be caught by the swath former

and injured.
Folding in to transport position only

Fold the swath former in to transport position only. If the swath former

is folded in with the raking wheel slewed, this can be damaged.
Fold the rear swath former to transport position as follows:

> Pull the cable for the 3-way ball valve to the stop

> Fold the swath former up by means of the hydraulic control device

OTE

Once the swath former has been pushed to the rear, you must push it

forwards before folding it inwards in drive direction. Otherwise the

swath former will protrude over the rear edge of the implement.

→

Chapter »Preparations on the field«, section »Setting in drive di-

rection«, page 40

Front swath former

[+] in parking position

During transport journeys and when the front swath former is not re-

quired, put the latter in parking position from the right and secure it:

> Release the shackle and T-screws

> Pull the swath former out of the guard stay, peg it in parking posi-

tion and secure

> Lock the T-screws with the shackles

Swath former

3-way ball valve

Cable

Swath former

T-screw with shackle

Parking position

All manuals and user guides at all-guides.com

Содержание SwatMaster 7131 EVO


































































Результаты поиска

Содержание SwatMaster 7131 EVO

Отзывы:

Похожие инструкции для SwatMaster 7131 EVO

Бренды по названию

Популярные бренды

DEUTZ-FAHR SwatMaster 7131 EVO, Руководство по эксплуатации

Результаты поиска

Содержание SwatMaster 7131 EVO

Отзывы:

Похожие инструкции для SwatMaster 7131 EVO

Бренды по названию

Популярные бренды