36
Preparations on the field
Two individual
swaths
Collision danger
There is a danger of collision between the swath former and the tine
supports of the front raking wheel. Adjust the swath former fully to the
rear before slewing.
For the position "Two individual swaths“ the rear raking wheel is sle-
wed to the right. This position is used mainly for producing night
swaths during hay harvesting.
When using the rear swath former, the latter must be pushed fully to
the rear.
→
Chapter »Preparations on the field«, section »Setting in drive di-
rection«, page 40
If using the "front swath former“ [+], fit this to the guard support:
> Release the swath former from the transport holder
> Insert and secure the front left swath former
→
Chapter »Accessory equipment«, section »Front swath former«,
page 58
Setting two individual
swaths
Set the position "Two individual swaths" as follows:
> Open the ball valve on the hydraulic coupling for the steering
> Drive slowly forwards and slew the rear raking wheel to the right by
means of the control device. The pivoting cylinder is fully extended.
Swath former, front
Swath former rear,
All manuals and user guides at all-guides.com
