Preparations on the field
35
Set single swath with the
preselection lever [+]
> Put the preselection lever in the position "Single swath“. To do so
turn the lever to the front and lock it.
> Drive slowly forwards and slew the rear raking wheel to the left by
means of the control device. The pivoting cylinder is fully retracted.
N
OTE
If necessary, extend the pivoting cylinder a short way, before the au-
tomatic preselector clears itself and straight-on position can be pas-
sed through.
Support the retraction of the pivoting cylinder by slowly driving for-
wards.
The rear raking wheel can be slewed with this setting on the preselec-
tion level only to the left and back to the middle. For slewing to the right
to the position "Two individual swaths" the preselection lever must be
shifted.
Preselection lever
All manuals and user guides at all-guides.com
