10
Important system facilities
You can divert calls to an external telephone (e.g. mobile telephone). First of all, the number
to be called must be stored as a central short dialling code. The charges for the connection to
the new dialling are accounted to your PABX system. You can choose whether only internal,
only external or all calls are to be diverted. A special dialling tone reminds you that call
diversion is active.
LR1
1T*
TP
Press the call diversion key. Press the query key. Press the numeral keys 1, 1.
Dial the short dialling code (between two and 4 digits) for the stored
external number. (If necessary, select diversion mode: press asterisk key and
then 1 for internal, 2 for external, 3 for all calls). Press the program key. The
LED on the key lights up.
Upon returning to your desk or office you can switch the call diversion facility off again.
L
Press the call diversion key. Call diversion is switched off. The LED goes off.
When you leave your desk or office you can divert all calls intended for you to another
telephone. You can choose whether only internal, only external or all calls are to be diverted.
A special dialling tone reminds you that call diversion is active.
LT*
TP
Press the call diversion key, enter the dialling number (internal number). (If
necessary, select diversion mode: press asterisk key and then 1 for
internal, 2 for external, 3 for all calls). Press the program key. The LED on
the key lights up.
Upon returning to your desk or office you can switch the call diversion facility off again.
L
Press the call diversion key again. Call diversion is switched off. The LED
goes off.
• If you use this type of call diversion regularly, it is advisable to program the function to one
single key
together with the dialling number
(cf. page 16). In this way, call diversion
can be switched on or off with one single keystroke.
• Even if you have no function key for call diversion because you have changed the key lay-
out, you can still divert calls. Instead of pressing the call diversion key, press the program
key, followed by the number 2, to activate the function. Then continue as described
above. Call diversion is switched off again with program key, 2, program key.
• If you omit to select the type of call diversion using the key sequence: asterisk, 1 to 3,
then all calls will be diverted, unless a previous setting is still programmed, in which case
this remains valid.
External
call diversion
Internal
call diversion
Notes
