USER MANUAL
20
DESOI GmbH | Gewerbestraße 16 | D-36148 Kalbach | Phone +49 6655 9636-0 | Fax +49 6655 9636-6666 | [email protected] |
www.desoi.de
5.2 Switching positions of driving unit
Direction
–
of - rotation switch:
Fig.5.2.1
Direction of rotation "right".
Direction of rotation "left".
NOTE!
In all operating modes of the machine, the direction of rotation
switch must be set to "clockwise".
Gear switch:
Fig.5.2.2
Fig.5.2.3
The drive unit has a two-stage gearbox. With
the gear switch, the maximum speed range
can be limited in advance. For this purpose
switch off the drive unit, press the push
button (red circle) into the switch and move
the switch to the desired position.
Position 1
Speed range from 0
–
1200 U/min
Position 2
Speed range from 0
–
3400 U/min
Main switch with latching function and speed controller
Fig.5.2.4
1.
Main switch
2.
Speed controller
3.
Snap-in push-button
If the drive unit is connected to a suitable energy
source, it can be started by pressing the main switch
(push into the handle).
The drive unit is put into the continuous operating
state by simultaneous additional actuation of the
latching pushbutton. This can only be reset by
pressing the main switch. Via the speed controller,
the speed can also be controlled separately by
turning from "A to F".
Fig.5.2.5
Function switch
Fig.5.2.6
„Punch“
„screwing“
NOTE!
It is essential to ensure that the function switch of the drive unit is set
to the "Screws" symbol and not to the "Impact" position, as this is
the only way to ensure smooth and gentle working with the machine.
Switch off the drive unit before switching over!